SP7015 TRX MACHINE MAINTENANCE
24
SAFETY
• NEVER SERVICE A MACHINE WITH THE ENGINE RUNNING, SEVERE
PERSONAL INJURY COULD OCCUR. TURN ENGINE OFF THEN REMOVE
IGNITION KEY AND DISCONNECT POSITIVE BATTERY CABLE TO AVOID
STARTING MACHINE ACCIDENTALLY.
• CUTTER WHEEL MUST BE DISENGAGED BEFORE TURNING ENGINE
ON/OFF AND BEFORE SERVICING A MACHINE. OTHERWISE SEVERE
PERSONAL INJURY COULD OCCUR AS WELL AS MACHINE DAMAGE.
• ALL MACHINE PARTS MUST COME TO A COMPLETE STOP AND HAVE
TIME TO COOL COMPLETELY BEFORE SERVICING A MACHINE OR
SEVERE INJURY COULD OCCUR, POSSIBLY SERIOUS BURNS AND/OR
DISMEMBERMENT.
• PLACE THE CUTTER WHEEL ON THE GROUND WHEN PERFORMING
SERVICE ON A MACHINE.
• Check engine oil at dipstick with the engine
sitting level. Add recommended oil and
changes oil as required per the engine owner’s
manual.
• Check hydraulic oil tank. A sight glass is
provided on the tank for easy viewing. If fluid
is visible in the sight glass, oil level is good.
Keep tank filled to the proper level,
approximately 7/8 full, leaving space at the top
for expansion as oil gets warm.
• This machine is equipped with Citgo AW 32
hydraulic oil at the time of manufacture. Refill
with the same or equivalent oil.
OIL FILL
Comments to this Manuals