Carlton 2018HD Operator's Manual download pdf (Page 70)

18” CHIPPER MACHINE MAINTENANCE

43

• Do not clean the safety filter. Replace

the safety filter if dirty or when the main

air filter has been cleaned 3 times.

• When cleaning or changing the air

filters, place tape over the air inlet hole

to reduce the chance of any dirt getting

inside the engine. Use a clean dry cloth

to wipe down the inside of the air

cleaner housing and cover.

• Check the general condition of the air

cleaner housing and components. Make

sure there are no dents, cracks, or other

damage to these parts that could allow

unfiltered air to enter the engine.

RADIATOR SCREEN & FAN

• Inspect the radiator for dirt, insects,

leaves, oil, and other debris that can clog

the radiator screen and fins. The radiator

screen and fins should be cleaned using

pressurized air from the backside of the

radiator. For further cleaning

instructions refer to the engine owner’s

manual.

• Inspect for damaged or bent fins, fan

blades, and for corrosion. Inspect the

welds, mounting brackets, connections,

clamps, air hoses, and seals for damage

or breakage. Repair or replace any

damaged parts.

OIL & OIL FILTER

• Change engine oil and filter every 250

hours of operation or 3 months. Follow

the engine manufacturer owner’s manual

for changing the oil & filter. Only use

engine manufacturer recommended oil

filter. Some engine manufacturers

require special break-in oil to be run for

a certain period of time. Refer to engine

manual supplied with your chipper.

DIESEL FUEL

• Check fuel level daily and replenish as

necessary. Carlton chippers are

equipped with fuel level indicators and

lockable cap covers.

MAIN FILTER

SAFETY FILTER

RADIATOR SCREEN

CLEAN FROM THIS SIDE

ENGINE OIL FILTER

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 193 194

Comments to this Manuals

No comments